|
Frequency Response |
10-55 |
| Principal | MI |
| Channel Separation at 1KHz | 30 |
| Imput Load | 47K |
| Output at 1KHz 5CM/sec. | 5mV |
| Recommended Tracking Force | 1.5 |
| Stylus Type | E |
| Inductance | 45mH |
| Resistance | 475 |
| Compliance CUs | 20 |
| Stylus Replacement U=user | U |
| Mounting | S/P |
| Weight | 5.5 |
The newly redesigned Blue1 and Red1 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Blue1 and Red1 models use a four piece OTL cantilever technology, standard oxygen free wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Red1 model is selected from the Blue1 production run and meets higher test specifications. Approximately 10% of the production run will meet these standards and become Red1 models.
What
People are saying about the Red...
| "There was great detail and articulation, as every little nuance was audible." |
| "On "Greensleaves" from the LP Paul Desmond and the Modern Quartet, the Grado was very impressive!" |
| "The Grado Prestige Red is proof that one does not have to spend large amounts of money for good sound from a phono cartridge." |
| $ensible Sound / James T. Frane |